Installation process of "Baotou Express Gate" underground garage stacking door
In the era of purchasing consulting fast shutter doors, many customers may be engaged in their own industry and installation, they want to install fast shutter doors to achieve their own, then is it feasible?
Here, "Baotou Fast Gate" Longsheng Gate Industry wants to tell you that we can really install the fast rolling shutter door by ourselves. Now, no matter how to operate and install the fast curtain door, it has made great progress. It is called the fool fast curtain door in the industry. Come with Xiaobian to understand the installation of the fast curtain door.
When installing the fast rolling shutter door, we should pay attention to the fact that the fast rolling shutter door is composed of many parts, including the motor which provides the power function, the electric box which serves as the control system, the door curtain, the open window and so on.
he quality of fast shutter door is reflected not only in the quality of each component itself, but also in the installation.
Fast curtain door installation quality is high, fast curtain door operation can be more long-term, more stable, use process can avoid many unnecessary troubles.
Before installation, the installer must be familiar with the installation drawings of the fast shutter, check whether the wiring of the fast shutter is in place, and prepare for the rest of the installation, including the parts and tools needed.
Before installation, it is also necessary to check whether the size of the door is in accordance with the size of the hole, whether the number of guide supports is correct, whether the embedded parts of the hole and the position of the embedded parts of the support are correct, and so on.
Installation process is roughly divided into: hole treatment, elastic wire, fixed drum transmission device, no-load test, curtain board, installation of guide rail, test run, cleaning.
Hole treatment: Check whether the size of the hole is in accordance with the product size. Generally, the width and height of the hole should not be greater than 6m. Check the location and quantity of the embedded parts.
Bullet Line: Measure the elevation of the hole, eject the vertical of the two guideways and the middle line of the drum.
"Baotou Fast Gate" Longsheng Gate Industry is a fast rolling shutter door installation manufacturer, more than ten years old brand, good character, after-sales intimate, comprehensive, if you want to know more about the installation of fast rolling shutter door knowledge, welcome to contact our customer service personnel. We will serve you wholeheartedly.